Can anything top a freshly laid lawn? The scent of fresh grass, the bright green color, and the feel of it under your feet. A new lawn is a great addition to any home. But when can you mow your brand new Sod? Keep reading for tips and tricks on when to cut grass after new Sod.

Read: How to lay sod over existing lawn

The Ideal Time To Mow New Sod

After you’ve installed new grass rolls, it’s important to wait a few days before mowing it for the first time. In this way, the roots will establish themselves and get firmly entrenched in the ground. You are risking the grass to grow properly if you cut it before time.

However, waiting too long can also be problematic. If the grass gets too tall, it will be more difficult to mow and may require special equipment.

So, when is it safe to cut new Sod? As a general rule of thumb, wait for at least seven days but no more than 14 after laying new Sod before giving it a trim. When the foundation is solid, you can move on to start mowing regularly.

Read: Tips to Take Care of Your New SOD after Installation

The Ideal Mowing Height For New Sod

As any gardener knows, mowing height is crucial in maintaining a healthy lawn. The grass will be more vulnerable to get harm from pedestrian traffic if it is too low and won’t be able to photosynthesize effectively.

However, if the Sod is allowed to grow excessively long, it will be more challenging to cut and may even become wet.

The ideal mowing height will depend on factors such as the type of grass, the length of the internodes, the number of rhizomes/stolons, and the number of basal buds. With a little trial and error, you’ll be able to find the perfect mowing height for your new Sod.

Read: Types Of Paving Slabs With Pros & Cons | DIY Installation

You Should Cut SOD At Different Heights According To Grass Type

With the different types of grass, it’s important to know how high to mow your new Sod. For instance, Kentucky bluegrass should be mowed at 1.5 to 2 inches, while you should only mow Bermuda lawns at 0.5 to 2.5 inches.

Centipede grass does well at 1 to 2.5 inches, and St. Augustine, grown in full sun, can be kept short at 1.5 to 2 inches using a reel mower.

Zoysia grass is versatile and thrives in a range of mowing heights, from 0.5 to 3 inches, while you can cut Bahia grass between 2.5 to 4 inches without having scalping issues. Fine & Tall Fescues benefit from being kept on the high side of the range at 1.5 to 4 inches.

When you first sow seed or lay down new Sod, wait until it’s about 3-4 inches tall before mowing it for the first time – and then follow the recommended mowing height for your type of grass from there on out!

Read: Hardscape Installation: How to make steps and paths?

How To Maintain Your Sod Before You Cut It

Taking the right steps after putting down new Sod will help it grow roots quickly and well. Use these suggestions before you cut for the very first time.

1. Fertilize Your Lawn Before You Mow It

A well-fertilized lawn is a key to healthy, green Sod. Unfortunately, many homeowners need to pay more attention to this important step in lawn care.

As a result, their lawns slowly turn brown and patchy. Fertilizing your lawn before you mow is one of the best ways to keep your Sod looking its best.

Furthermore, mowing your lawn before fertilizing will help distribute the fertilizer evenly across the new SOD. Therefore, you won’t need to stress over about over-fertilizing or under-fertilizing your lawn.

2. Before You Start Mowing Your Lawn, Water It First

It is a cardinal rule in lawn care to not the grass if it is dry. If you do, you risk scalping your grass, leaving yellow patches on your lawn that will take weeks or months to recover.

Furthermore, mowing when the grass is too dry will damage the blades, making them more susceptible to disease and pests.

For this reason, Sod needs to be watered just before being mowed. This will help to ensure that the blades are properly lubricated and that the mower will not damage them.

In addition, watering before you mow will also help to prevent scalpings, as the extra moisture will make it easier for the blades to bend instead of being cut. So watering before you mow is essential for maintaining a healthy lawn.

3. Keep Foot Traffic To A Minimum.

It’s tempting to think of your lawn as a big green welcome mat, but too much foot traffic can damage your new Sod.

The grass is delicate, and heavy footsteps can easily uproot its shallow roots. In addition, compacted soil makes it harder for new sod growth.

So, try not to put too much stress on that brand new grass by walking on it. If you must walk on the grass, stick to well-worn paths. And when it comes time to mow the lawn, use a sharp blade to avoid ripping up the Sod.

4. Watering The New SOD Regularly In Summer.

One of the most important things you can do to maintain your Sod before you mow it is to water it more in the summer.

This is because the sun and heat can quickly dry out the Sod, causing it to become yellow and faded. By watering your Sod more frequently, you will help to keep it green and healthy.

Read: Discover Best Interlocking Brick Pavers Installation Ideas

Advantages Of Mowing Your Recently Planted Grass

1. Mowing Helps To Remove Weeds

The elimination of weeds is a major advantage of maintaining a regularly mowed SOD. Weeds compete with your lawn grass for water, nutrients, and sunlight.

2. Mowing Promotes Grass Growth

You are giving your grass a haircut when you mow your lawn. This helps to stimulate new growth and make your grass fuller and healthier.

Additionally, mowing helps to remove old and dead grass blades, which can improve the appearance of your lawn.

3. Mowing Improves Lawn Drainage

When you use a lawn mower, you create small openings in the ground that allow water to drain more easily. This is of particular use in perpetually damp or muddy regions.

Final Thoughts

It’s critical to understand when to mow new Sod if you’re going to place it in your yard and make it look beautiful. We can assist you in deciding if it is worth laying Sod on your lawn. Deo Landscaping provides Sod installation services in Surrey, BC, Vancouver and Richmond.

Read: 6 Basic Tips to fix Grass in Heavy Traffic Areas

The post When To Cut New Sod? Tips and Tricks appeared first on Deo Landscaping.

Have you ever gazed through a window and seen a yard full of brown, patchy grass? It can be so frustrating! One way to fix this is to lay SOD over your existing lawn. SOD is made up of grass plants that are already established to give your yard an instant makeover. Follow these steps to lay SOD over your lawn for a lavish yard.

Unsurprisingly, people are always looking for a shortcut to building new grass. It makes perfect sense to cut your grass short and put up new SOD directly over it. Many believe the existing lawn will expire and supply nutrients for the new SOD, but this is not true.

Read: When To Cut New Sod? Tips and Tricks

Why You Should Not Install New SOD Over Existing Grass

Beware if you’re thinking of giving your lawn a fresh start by laying down some new SOD! You may think that dumping a new layer of grass on top of your old lawn will save you time and effort, but in reality, you’re setting yourself up for failure.

The roots of your new SOD will have difficulty penetrating the existing turf to reach the soil bed below.

In addition, once the new SOD you laid on over your old lawn has perished, you will need to remove both layers of SOD before you can plant any new grass because there will be no room for it to take root.

Also, old weeds may resurface after being covered by the new SOD. In addition, your new SOD won’t look as good if installed over existing grass. The existing grass will stick up through the new SOD, making it look patchy and uneven.

It’s far better to do the job right first by starting from scratch. So before laying down that new SOD, ensure you’ve removed all traces of the old lawn. You will only give your grass a fighting chance to take root and thrive.

Read: Tips to Take Care of Your New SOD after Installation

How To Remove The Existing Grass

We’ll review how to remove existing grass to make way for new SOD properly.

• Get rid of the grass that’s already there. If the old turf is not too thick, you should be able to accomplish this job with just raking and a rototiller. You should utilize a SOD blade to pick up the older grass in sections if the older grass is denser or if you are replacing a huge portion of the lawn.
• After you’ve finished cutting the old grass in a certain area, dig up just over one inch of the soil there.
• Be sure to get rid of any rocks, roots, or other debris that could impede the growth of your new SOD.

By taking these steps, you’ll lay the foundation for a healthy and vibrant lawn. New SOD has a better chance of taking root and thriving when it’s properly prepared for.

Preparing The Soil For A New SOD

Now you’re looking to spruce up your yard with new SOD, and the first step is to prepare the soil.

• You’ll want to start by tilling the leftover dirt to loosen up and break up any large lumps.
• Level the soil for a flat appearance with no rough places.
• Apply a thin layer of topsoil to the soil to add some additional nutrients.
• Finally, lightly water the soil to moisten it before you lay down the SOD.

Now you can ensure that your new SOD will have a strong base and be able to bloom in your yard.

Read: 6 Basic Tips to fix Grass in Heavy Traffic Areas

How To Lay SOD

Here are a few steps which you need to do to prepare the ground.

• Ensure a debris free soil and loosen it for the roots to take hold.
• Roll out the SOD in strips, carefully flushing it against the existing grass with no gaps between the strips.
• Once the entire section is covered, trim any remaining SOD with a sharp knife or tool.

Read: Hardscape Installation: How to make steps and paths?

6 Tips For SOD Aftercare

After installing your new SOD, you can do a few things to help it take root and flourish.

1. Minimum Foot Traffic

First, try to keep foot traffic to a minimum. SOD is very delicate when newly installed, so it is vital to adjust it properly.

2. Water Regularly

Depending on the weather and the type of SOD you have, you may need to water every day or every other day. You must ensure that your SOD is not drying out by checking it very frequently at different times.

3. Fertilize Regularly

Another important step in taking care of your SOD is regularly fertilizing it. You should start fertilizing your SOD when it is installed and then continue to fertilize it every few weeks throughout the growing season.

4. Mow Regularly

Mowing your SOD when it grows about 3 inches regularly is also important for its health. You can use a sharp mower to avoid grass damage.

5. Overseed Yearly

Overseeding your lawn each year will help to keep it thick and lush. It helps to fill in any bare spots that may have developed over the year, and it also helps to improve the overall health of the grass.

6. Remove Debris Regularly

Debris, such as leaves, twigs, and stones, can damage your SOD if not removed regularly. Be sure to rake up any debris accumulated on your lawn and remove any stones or other objects that could damage the grass blades.

Read: Types Of Paving Slabs With Pros & Cons | DIY Installation

Final Words

If you’re considering whether to lay new SOD over your existing grass, don’t. The results will be disastrous, and you’ll have to remove all the SOD and start from scratch anyway.

Save yourself the hassle and do it right the first time by removing your old grass before installing new SOD.

If you require any assistance to remove your old grass or install new SOD, call Deo Landscaping in Vancouver, Richmond and Surrey, BC. We would be happy to assist you and ensure that your lawn is healthy and green all year round.

Read: Discover Best Interlocking Brick Pavers Installation Ideas

The post How You Can Lay SOD Over An Existing Lawn appeared first on Deo Landscaping.

Are you a new homeowner who recently had SOD installed? If so, you’re likely excited to see your lawn turn green! However, before you can start enjoying your new SOD, there are a few things you need to do to take care of it. This post will share tips on taking care of your new SOD and helping it thrive.

Why Should You Do It?

Your lawn is a reflection of your style. But more importantly, your lawn is a living thing – it needs care and attention to stay healthy.

It’s a complex ecosystem that provides food and shelter for wildlife, help to regulate water and soil erosion, and can even improve your mental health.

Despite its importance, many people take their lawns for granted. They need to water or fertilize, allow weeds to take over, and don’t think twice about running the mower over delicate flower beds.

As a result, they end up with a barren plot of land that does nothing but add to their stress levels. So if you want to create a haven for yourself, it’s time to start taking care of your lawn.

Water The Soil Before The SOD Installation

When it comes to laying SOD, timing is everything. If you lay the SOD during the heat of the day, the soil will quickly absorb all the water, and your efforts will be wasted.

It’s best to wait until the evening or morning hours when the earth is cooler and moisture is more likely to stay in place.

Additionally, make sure to hydrate the soil before laying the SOD. This will help the new roots take a stronghold.

Thoroughly Water The Lawn After The SOD Installation

Lay down the grass and immediately give it a good soaking for about twenty minutes twice a day. This will give your lawn six inches of water per cycle.

Check for dry spots and use a handheld sprayer to reach areas your sprinklers might not cover.

For the first 14 weeks, your lawn needs the most water. Avoid walking on your new lawn for the first two weeks or until you’ve cut it for the first time.

Use Of A Lawn Roller

You’ve just installed new SOD in your yard, which looks fantastic. To keep it looking that way, you must take care of it properly. The use of lawn rollers helps to compact the soil, which helps the roots to take hold.

They can also assist in removing any bumps or depressions in the surface of the SOD. Rolling your lawn also helps to remove any air pockets that may have formed beneath the SOD during installation.

By compacting the soil and removing air pockets, lawn rollers provide essential support for new SOD while helping ensure a smooth surface.

Help Roots Grow

After you’ve unrolled your new SOD and given it a good watering, it’s time to think about fertilizer. Fertilizer helps roots grow strong and gives the SOD the nutrients it needs to return to normal after being unrolled.

A month after you put in the plants, look for granular starter fertilizer with the number 18-24-12 written on it. If you want a natural solution, ask the staff at a garden center what you can do for your type of lawn.

No matter what you decide, remember how important this step is for your lawn. Your new lawn will only be able to grow strong roots if it gets enough nutrients.

How And When To Mow

You should wait at least 2-3 weeks after installing SOD before mowing for the first time to establish themselves in the soil.

And, when you are mowing the grass, ensure it is dry to prevent the blades from breaking. You should also set the blade to a higher setting, as you don’t want to cut the grass too short.

After the first mowing, you can lower the blade and mow as needed. It’s also essential to sharpen the blades on your mower to stop damage to the grass.

You can sharpen the blades yourself or take them to a professional. If you sharpen them yourself, use a sharpening stone made for lawnmower blades.

Most experts say that you should mow your lawn every week during the growth period. And for cutting height, you should take extra care. Start by cutting only a third of the grass blade, then gradually increase the cutting height over time.

Pest Control

Establishing a new lawn takes work, but once it’s done, you want to ensure it stays healthy and weed-free. The best time to apply your first weed control product is after your lawn has been mowed four times and appears lush and healthy.

Look for a product specifically designed for your lawn type and growing zone – your garden center can help you find the right one. Once you’ve applied the weed control, give your lawn a few weeks to recover (four to five more mowings) before applying any pest controls you may require.

To Sum It Up

All left is to take care of your SOD and enjoy your new, green lawn! With the right care, your SOD will stay healthy for years to come. For all your lawn care, gardening, and landscaping needs, call Deo Landscaping in Vancouver, Richmond, and Surrey, BC. We specialize in SOD installation and maintenance and would be happy to help you achieve the lawn of your dreams!

FAQs

Do I need to fertilize the new SOD?

You should fertilize the new SOD with a starter fertilizer, which is unnecessary.

For how long must one wait for new SOD to grow?

New SOD generally takes about two to four weeks to root.

How long should new SOD be watered?

New SOD should be watered for about 15-20 minutes twice a day for the first two weeks, then slowly taper off to once a day.

How much water should I give the new SOD?

Watering newly-installed SOD is crucial for the grass to take root and grow. Give the SOD about 1 inch of water per week for the first two weeks, then increase the amount to 1.5 inches per week.

The post Tips to Take Care of Your New SOD after Installation appeared first on Deo Landscaping.

There are many ways to hardscape your yard, and the options are endless. You can pick out a wide variety of design styles, materials, and colors. Whether you want a classic or unique look, you can certainly find a suitable hardscape design. This article will provide some tips on how to get started with Hardscape Installation and how to find the right ideas for your property.

Hardscape In Vancouver, Richmond, and Surrey, BC – Deo Landscaping is a company that offers comprehensive hardscape services. We offer a range of services, including patios and driveways, hardscaping, and paving. We take pride in our reputation for excellence, and our team is dedicated to providing the best possible service to our clients.

What is Hardscape?

Hardscaping classifies any manufactured structure in landscaping made from inanimate items like gravel, stones, bricks, or pavers.

Any non-living items used to build fastened structures in an outdoor area without growing plants are considered hardscapes. DrivewaysDriveways, patios, and fountains are the best examples of hardscape features.

Hardscape vs Landscape

In much of landscaping, hardscaping is the artificial structure made of manufactured materials instead of living materials.

• Landscaping is commonly associated with the design and execution of plant life, including trees and shrubs, flowers, etc. Meanwhile, hardscaping is concerned with the hard material on your property, including patios, walking surfaces, retaining walls, etc.
• The soft, coziest, most aesthetically pleasing features of your property, designed for decorative beauty, are in the main domain of landscape design. In comparison, people use resources like natural stone and manufactured products like concrete and veneer for hardscaping.

Landscape design encompasses the installation of plants, the pruning of foliage, and improving greenery around your house or company to add the correct psychological touch to your living or working environment.

Hardscape ideas are often more creative than landscape ideas because of the ease with which you can shape hard materials compared to growing plants.

Landscapes can be tended, whereas hardscapes can be sculpted into any shape imaginable. By placing a little creativity and thought into your hardscape, you can create a beautiful and challenging living space.

Types of Hardscape

If you want to add some interested character to your home, consider installing hardscapes. It comes in a wide range of styles, so they’re perfect for complementing the design of any property.

Hardscapes are a wonderful way to spruce up a space, and doing so will ensure you have lasting beauty and practicality.

1. Stone Pathways

Landscaping Companies typically construct Stone pathways from stone or concrete pavers. These let you walk to your desired area, causing no damage to your garden’s soil.

2. Decks and Patios

Hardscaping elements, such as wooden decks and patios, offer another way to extend private living space into a yard. You may need to use materials such as brick or concrete, depending on the details and ease of maintenance.

3. Fountains

A serene, natural environment can be created using features like fountains or garden streams.

4. Driveways

Driveways offer you a pathway to your home’s entryway. You can make driveways of concrete, brick, asphalt, or other sturdy, weather- and load-bearing substance.

While many people choose to pave their driveways, some opt to pave new driveways when they expand their homes or remodel old ones.

5. Fire Pit

A popular option among hardscapes is an in-ground fire pit. Fire pits add an engaging element to your landscape while also providing a cozy space for you to gaze at a blazing fire on cool evenings.

Hardscape Installation In Surrey, BC: How to make hardscape steps and paths?

Before Installation:

There are many things to consider when designing a hardscaping project.

Selecting the material:

The first step is to select the important products and materials to choose wisely. Choosing the material for a project can be a daunting task. Before starting any design, it is important to have a clear idea of what you want to achieve.

Designing the project:

After the selection of the material, start designing the project. Using a computer program or drawing out the design on paper, you can do this. The design should consider the size and shape of the area and any existing features that need to be preserved or incorporated into the design.

Install Hardscaping:

The last step is to install the hardscaping. This can be a challenging task, so hiring a professional is important.

Hardscape Installation and Patio Installation In Surrey, BC

The installation procedure for hardscaping and landscaping can often be challenging. For that reason, we strongly recommend the use of a professional landscaping company for this kind of work. A pro will have creative suggestions and will offer you consultations.

Clearing the targeted area:

If you decide on a company to set up and install your patio and hardscape, first, they will clear the area to ensure it works properly. Installation workers are responsible for the inspection of your base’s strength and stability.

To begin with, clearing your yard is the most important thing! Sometimes, it will require excavation and other tasks.

Placing the mortar:

The next step is to place the mortar. After the pavers or concrete have been placed, these will lay on this bed. Pipes are placed on this bed to ensure that they are level and function properly.

Placing the pavers:

Once they have finished laying pavers or the cement, they will lay down the patio stones and so on. After completing this step, a patio or other hardscape surface will be ready to be used and decorated! Any items destroyed or moved during the construction process will be promptly repaired.

Conclusion:

It will take a considerable amount of time or effort in order to make the place you have always wanted. For this, consider taking help from a skilled landscaping company.

Not only will a landscaping professional assist you in bringing your dreams to reality, but they will also prevent you from making any mistakes during the process.

Deo Landscaping Company In Vancouver, Richmond, and Surrey, BC

Suppose your goal is to transform your yard, and you are looking for a company that offers patio installation, hardscape installation, and driveway installation. In that case, Deo Landscaping Company can be a great help to you!

Contact us for a consultation about hardscaping, or browse our portfolio to view examples of our patio and hardscaping designs.

The post Hardscape Installation: How to make hardscape steps and paths? appeared first on Deo Landscaping.

Patio slabs are great ways to add an extraordinary look and style to your garden. Follow the installation tips and ideas discussed in this article to get started with your patio slab project. There are many types of patio slabs, so it’s important to find the one that will fit your needs through experts like Deo Landscaping Company. This company’s services include patio slab installation. The company has various types of patio slabs that you can choose according to your taste and also ask for help from the experts to add a professional look to your home.

What is Patio Slab?

Patio slabs are made of various materials, including concrete and pavers. They come in various shapes and sizes and are also used for various purposes, such as outdoor seating, borders for gardens or yards, or even as steps. They are an affordable way to add some extra dimension to your backyard space and customize them according to your needs.

Types of Paving Slabs with their Pros and Cons

Patio slabs are an important part of any patio. They provide a sturdy foundation and a level surface to place furniture and other outdoor items. There are various typestypes of patio slabs available, each with advantages and disadvantages.

1. Concrete Patio slab:

A concrete patio slab is a great option for anyone looking for a durable and affordable substrate for their outdoor living space. Concrete patio slabs provide stability, weather resistance, and years of enjoyment. However, there are some cons to consider before deciding to install one. Some potential drawbacks include being difficult to install and requiring professional help. Concrete slabs are available in limited colors and are traditional more appealing than other types of flooring.

Pros:

• Concrete is a flexible and long-lasting material that will last for decades with relatively minor damage. It’s resistant to breaking and can endure considerable weight without degradation. Contractors use concrete for bridges, buildings, and other heavy-loading tasks since it is an exceptionally durable material that will typically have a substantial return on investment.
• Concrete paving slabs are often preferable for commercial decks because they are less costly and more prone to repairs. If you have damaged, stained, or worn titles on your concrete deck, it is easier to remove them and replace them rather than have to re-pour the entire surface.

Cons:

• Concrete surfaces are vulnerable to stains and discoloration if you cannot clear them away. To keep your paving slabs from losing their appearance and developing ugly stains, take care of them thoroughly and have them resealed as recommended by the manufacturer.
• Concrete paving slabs usually take longer to install than poured concrete, making them difficult to take on a do-it-yourself project.

2. Sandstone paving slabs

Sandstone slabs have an inherent roughness that increases their slip-resistant properties, making them optimal for settings like pool areas and rain-soaked service areas.

Pros:

• It is not as hard as marble or granite, but it can last a decade with the proper maintenance.
• Affordable and cheaper in price.
• If you want your paving to sport that organic look of natural stone, sandstone is for you. It comes in various shades, from an inviting and neutral tome for implementing a modern appeal to a fresh color scheme to transform your garden into a tranquil oasis. Also, you can opt for beige and gray tones for a bucolic summer landscape.

Cons:

• Sandstone flooring can be quite susceptible to damage if not cared for properly, and in certain instances, liquid or mold can cause staining.
• They are 100% natural, so sometimes their surface can be over-rough occasionally.

3. Limestone paving slab

Limestone paving slabs are mainly used for patios, walkways and courtyards because they are made of natural quarried stone. Also, slabs made of such stones are not resilient.

Pros:

• Limestone’s fine-grained texture gives its luxurious appearance, so it’s commonly used for paving surfaces. This lends a smoother quality to the ground.
• When the limestone surfaces lightened up, the mineral produced deep, unusual, and attractive colors.
• If you’re an enthusiast of limestone’s fine end and texture, it may motivate you to be more affordable than other patio slabs.

Cons:

• Limestone is more porous than sandstone, and as a result, it dissolves more rapidly. Calcium comprises most of the chemical composition of limestone, which leaves it at a high risk of bleach when exposed to sunlight for too long.

4. Granite Paving Slabs

Granite is quite a unique stone from the others available. It features the only known igneous stone that humans can access and is long-lasting because of its inherent composition. Granite slabs have a range of colored and glossy surfaces, including white, black, and brown.

Pros:

• Granite’s qualities allow it to be resistant to water and even to scratch the surface.
• They are resistant to any kind of weather.
• Available in almost every color.
• Easy maintenance

Cons:

• Difficult to cut because of its hardness.
• Expensive than other patio slabs available.

5. Patio Slabs Porcelain

Firing clay manufactures porcelain tiles at extremely high temperatures, resulting in the same slab’s desired shape and size. After this title has fully dried out, it travels through a glazing process. The pattern can be any design you can think of.

Pros:

• Porcelain is non-porous; it does not absorb stains or deteriorate when exposed to liquid water.
• Easy to clean
• After cleaning, strong, well-established tile with a smooth finish will look completely new.

Cons:

• They are hard to cut and require an expert blade for cutting.
• Porcelain is more costly than other natural stones.
• Difficult to install.

6. Paving Slabs Cork

Paving slabs cork is made from the outer cover of the cork oak tree. The rough bark is ground up and compressed to give a shape of a sheet. Later these sheets are bounded with resins to make a cork paving slab.

Pros:

• The soft ground would help reduce the noise you would hear when walking on the surface.
• Easy to install.
• Very effective insulator
• Eco-friendly

Cons:

• Venerable to ultraviolet lights because of the wood used in it. So, ultraviolet rays can easily damage them.
• Easily damage by pets or animals.
• Dragging furniture or other appliances easily damaged them.
• Expensive

Patio slabs are the best option for adding a patio to your home because they are less expensive and easy to maintain.

How to Install Patio Slabs Like a Pro | DIY

Suppose you’re thinking about building patio slabs and are more into DIY projects than installing your patio yourself or hiring a professional on the weekend. The major challenge would lift the pavers, especially working with small or large patio pavers.

Things you will require;

• A Trowel
• Wooden Pegs
• A Spade
• Slurry Primer
• Building Tape
• Building Sand
• A Rubber Mallet
• Sub Base Aggregate
• Cement

How to Lay a Patio Slabs: A Complete Step-by-Step Guide

1. Measuring the Area

First, measure and mark out the area with a building tape to figure out the area for your patio titles. Next, dig into the soil to determine the target area.

2. Clean and Digging the Ground for Pavers

If the grass targeted is too long, it might be worth cutting it into smaller segments with a spade and rolling it up. It would be time-saving when you attempt to fill in the gaps between the existing patio and the lawn.

The next step is to take 150mm depth; 10cm for the sub-base, 5cm are for the mortar and flooring slab. If you lay the slabs of mortar extremely thick, you must allow a little extra depth. If you are laying the patio next to your house, then the finishing should be about 150mm under the damp proof course delimit.

3. Sub Base

Put something under the paving slabs. Paving slabs shouldn’t be placed on a soft surface or grass. A sub base is essential to patio laying successfully in providing the base required for paving slabs.

Sub bases are required as the top layer for your patio. The sub-base that you use depends entirely on the depth of your patio and the building layer of sand. You cover up the mortar in your driveway or walkway with a variety of square titles.

To compact the sub-base ledge on your lawn, fill the bottom of your area with the sub-base material, then rake it to an even depth of 50mm beforehand. After compacting the soil, modern vibrating plate compactors will compact the base efficiently and the sub-base material.

4. Layer of Sand

Lay the layer of the builder’s sand as soon as your base is flat and level. Make sure the layer of sand you lay down is a minimum of 2 inches (50mm) deep.

5. Prepare Mortar

To start, add five parts of the builder’s sand to one part of cement. Then, add water as needed to make a dough-like consistency. Maintain the consistency just soft enough to work.

6. Before, Paving Slabs

Dampen down the slabs with the water bottle spray. Lay slabs that will dry out the mortar blend too soon.

7. Laying the Slabs

Place a dab of mortar in the center of your first slab with a trowel. Lay the slabs above the mortar and place the mallet on top of it. Continue laying your slabs in rows by leaving 10mm of space between them. For installing porcelain paving, it’s important to use slurry primer, which must cover the area you are working on.

8. Fix any Issue

Sweep the paving slaps to sweep out any irregularities. On this step, you can fix any problem. While checking the paving, set a note under each maintenance hole stand to check that they’re leveled properly.

9. Dry

Let the patio slabs dry up to 24 hours. Do not stroll on them during the time.

10. Fill the Gaps

After every coat, brush off excess concrete and sand to leave the surface of your patio clean. Mix equal parts cement and sand and use the material to fill in any gaps in the patio. Use a trowel to brush the excess material from the surface.

Professional Tips:

Four things to keep in mind; First, patio slabs need to possess certain measurements to be appropriate for your project. To begin, the slabs should be a suitable size to meet your needs. Second, be sure to get a slab that is weather resistant. Third, be sure to know the type of patio slab you want and then consult with a professional installer. Fourth, make sure to have your patio slab installation finalized correctly so that the slabs last for a long time.

FAQs

What is the cheapest type of paving slab?

Concrete and granite are the cheapest paving slabs, costing $6-$12 per square foot.

What should patio slabs be laid on?

Make a mortar which is the best-bedded sand for paving slabs.

Can I lay patio slabs on the soil?

Most companies do not advise laying patio slabs on the soil. The durability of the patio slabs depends on the soil and the thickness of the clay soil.

Can you lay patio slabs just on the sand?

Many companies not recommended to lay patio slabs on the sand bed as the slabs won’t stay still on the sand.

Conclusion:

Patio slabs are a great way to add a pop of color and flooring style to your backyard. They come equipped with durable components, are easy to install, and permit you to delight in the outdoors. There are many types of patio slabs discussed above, find experts from Deo Landscaping Company to help you select one that fit your needs. Deo LandscapingDeo Landscaping offers various services, like driveway paving, to create a beautiful pathway or parking lot.

Contact the company today to find out more about its services!

Related Posts:

Discover The Best Interlocking Brick Pavers Installation Ideas

How to fix high traffic grass | Maintain lawn-DeoLandscaping

The post Types Of Paving Slabs With Pros & Cons | DIY Installation Tips appeared first on Deo Landscaping.

Interlock Bricks are a beautiful addition to any landscaping project. Deo Landscaping refined interlock bricks from recycled materials and is available in various colors to cater to your needs.

Best Landscaping company services can help you choose the perfect interlock bricks for your project and provide installation instructions.

A Deo Landscaping company is a group of experienced professionals who have vast knowledge in the landscaping industry.

We offer a wide range of services, such as artificial grass installations, cedar installation & removal, mowing lawn & sod installation, stone and hardscaping, driveway pavers & slabs, and gardening & spring cleanup.

We are always looking to improve our services and ensure that we satisfy our customers with what we provide.

Read: When To Cut New Sod? Tips and Tricks

What are Interlock Bricks?

Interlocking brick, also known as interlocking tile or interlocking stone, is a type of construction in which two or more bricks laid on top of the other form a solid surface.

This pattern creates a sturdy driveway or a difficult wall to break through. You can find interlocking bricks in many styles and shapes.

Mostly, it is being used in constructing driveways, patios, retaining walls, roofs, and other structures.

Read: Tips to Take Care of Your New SOD after Installation

Interlocking Brick Designs:

Interlocking brick designs are a great way to add extra interest and color to your driveway, walkway, or other outdoor areas.

The patterns created by the bricks can be random or themed, and they’re perfect for areas that receive a lot of foot traffic.

Pavers made of interlocking stones are also a brilliant choice for areas that will be exposed to weather conditions.

They can withstand rain, snow, and other elements, making them popular for patios and other areas near the ground.

The design of interlocking pavers is unique and ever-changing, as companies create different designs to match the environment in which they will be used. Some designs feature intricate colors and patterns, while others are simple but effective.

Read: 6 Basic Tips to fix Grass in Heavy Traffic Areas

Advantages and Disadvantages of Interlocking brick pavers

Advantages

1. Appearance:

Compared to exterior concrete or stone structures, the paver bricks add a royal and elegant look to any structure.

2. Safety:

The surface of paver blocks has protected layers that carry anti-slip and anti-skid features. Because of this, they are safe to move around in all weather conditions.

3. Drainage:

Environment-resistant paving blocks will facilitate drainage during heavy rain, preventing any water from accumulating over the long term.

The outer edges of the blocks allow water to flow through the joints, as no mortar has been used to bind them together.

4. Low maintenance:

Simply spray or pour water and rinse the dust on the surfaces regularly. The top surface is higher quality, so it does not wear easily.

5. Removable:

The paver blocks can be removed or replaced easily without being damaged, as no mortar is used.

6. Wide Selection:

Interlocking paver blocks come in many hues, patterns, models, etc. You can easily choose the one that fits your particular desire.

7. Breakage:

If any single paver block breaks by accident, you can replace it easily.

8. Quick Installation:

You can do the installation process within a few hours, thus allowing users to save on labor costs.

9. Environmental friendly:

Its primary function is to help aquifers absorb rainwater into the ground. This indirectly aids in rainwater harvesting.

Disadvantages

1. Settlement:

The paved surface will become uneven if you do not compact the paver blocks properly.

2. Weed growth:

The ground surface must be clean before laying paver blocks. Poor workmanship can cause weed or fungal growth at the joints of paver blocks.

3. Fading color:

Companies used different metal oxides in the pavement to provide the colored top layer. If the oxide used during manufacturing is of low quality, the colors may fade soon after they’re laid down.

4. Uneven edge:

If the base layer of the paver blocks is not prepared according to the design, you may end up with bumps or unevenness on the paver surface.

Note:

To design a particular area, you will need expertise in all facets of outdoor designs, from the material and installation through visual design, setting, and fashion.

A specially trained professional says the poor craftsmanship and quality of the bricks create the drawback listed above. You can prevent these issues by following the correct installation strategy and sustaining paver quality.

Read: Hardscape Installation: How to make steps and paths?

Professional Tips and Ideas for a Perfect Interlocking Pavers Installation

Installing paving stones is simple if you follow the procedure and spend time, effort, and care on each step. If you try to be too careful when measuring, preparing, getting prices, and starting the process, each stage will lay a base for the next.

Read: Types Of Paving Slabs With Pros & Cons | DIY Installation

Things you need to lay an Interlocking brick driveway:

1. Shovel
2. Broom
3. Hand level
4. 1-inch pipe
5. Rubber mallet
6. Stakes and string
7. Grading rake
8. Concrete sand
9. Masonry saw or splitter
10. Wooden 2×4
11. Pavers
12. Vibrating plate compactor

Step by Step: How to lay Interlocking pavers

Follow these simple steps, and you will be on your way to creating a beautiful patio in no time.

Step # 1:

Measuring

Determine your interior dimensions, and then show them with stakes and string on the ground. Measure the amount of sand and gravel you require based on your measurement.

Step # 2:

Choose the right interlocking pavers

Pick suitable interlocking pavers. For normal pedestrian travel, select the average thickness of 2 3/8 inches.

Step # 3:

Dig the Base

Dig a baseline before starting the excavation to ensure safe drilling.

Using a ¾ inch crushed aggregate, set the base accordingly;

• 4/6 inch thickness for pedestrian traffic
• 6/8 inch deep around swimming pools or for vehicle traffic.
• For extra heavy traffic, add a few more inches.

Step # 4:

Compact/plain the base

Compact the baseline.

Step # 5:

Sand

Lay 1 ½ inch thick sand on the base, then level it out using the rake, pipe, and wooden 2×4.

Step # 6:

Install the edge restraint

Use the masonry saw or splitter to trim/clear the edges if necessary. Create a retaining wall to lock pavers as you set them in their places.

Step # 7:

Place the pavers

Start placing the pavers on the sand bed, progressing in a forward motion. Begin the process at a 90-degree angle, or use the string along the field’s perimeter to guide the pavers’ straightness.

Step # 8:

Compact the field

After placing the pavers, spread the thin layer of sand and put the vibrating plate compactor over them to begin the interlocking process.

Step # 9:

Spread a small amount of sand

Spread the polymeric sand with a broom; use the vibrating compactor two-three times, so the sand can fill out the voids between the pavers. Sweep away the remaining sand.

Step # 10:

Seal the pavers

Apply the mist of water to seal the pavers.

TIP:

Cobblestones are long-lasting natural stone pavers commonly sourced from quarries. These credibly durable pavers can endure for a century, giving them a coarse surface that will look great and last for centuries on driveways, patios, and walkways.

FAQs:

Are interlocking bricks good to use?

Interlocking brick pavers are a great option for paving a driveway because they are resistant to earthquake damage. Pavers withstand freezing and thawing. They are great for those regions prone to extreme weather.

What are interlock bricks made of?

Interlocking bricks are a type of brick that is manufactured by mixing compressed cement, sand, and soil. Companies then forced the mixture into molds to create the desired shape. The bricks are then dried in the sun or placed in a kiln to cook before being shipped off to be sold.

Read: Discover Best Interlocking Brick Pavers Installation Ideas

Conclusion:

In conclusion, interlocking brick pavers are a great way to improve the look of your property while also increasing its value.

Their easy installation and low maintenance requirements make them popular for many homeowners and business owners.

Suppose you are looking for a professional landscaping company that can help you choose the perfect interlock bricks for your project and provide installation instructions.

In that case, Deo Landscaping is the company for you. Because of their years of expertise, you can rest assured your interlocked brick paver project will be completed successfully.

Interlock Bricks near me

Contact us right now to make your plans a reality! 

The post Discover The Best Interlock Brick Pavers Installation Ideas appeared first on Deo Landscaping.

Looking for a reliable and experienced landscaping company in Surrey, BC? Look no further than Deo Landscaping! We provide full-service landscaping to residential and commercial clients in the area, and our team of experts has the knowledge and expertise to handle any landscaping project you may have.

So, we are dedicated to providing our clients with quality workmanship and excellent customer service. Contact us today for a free consultation!

Deo Professional Team Provides Landscaping services in Vancouver, Richmond, and Surrey, BC. 

Read: When To Cut New Sod? Tips and Tricks

How to fix high traffic grass

The grass is a beautiful addition to any landscape, but it can become damaged when it receives too much traffic. If your grass receives more traffic than it can handle, don’t worry – we have some tips for you!

As anyone who has ever had a lawn knows, the grass is not indestructible. In fact, it’s quite the opposite – the grass is quite delicate and can easily be damaged by too much traffic.

So, what can you do if your grass receives too much traffic? Below, we will outline a few tips to help get your grass back to its healthy state.

Read: Tips to Take Care of Your New SOD after Installation

What Damages a High Traffic Lawn?

A few things can damage a lawn that sees a lot of foot traffic. First and foremost, compaction is a major issue.

Compaction occurs when the soil is packed down too tightly. In addition to compaction, excessive traffic can also cause the grass to develop thatch.

We know a mat of dead grass that grows between the living grass blades and the earth known as thatch. It can inhibit water and air from reaching the roots, which can cause the grass to die.

Another problem that can happen on high-traffic lawns is that the plants and roots can get damaged. Heavy traffic can wear away at the turf and lift the roots out of the ground.

The grass becomes much more susceptible to drought when the roots are no longer anchored in the soil.

Read: 6 Basic Tips to fix Grass in Heavy Traffic Areas

Best Turf for a High Traffic Lawn

If you have a high-traffic lawn, it’s important to choose the right type of turf. Some grasses are more resistant to wear and tear than others. Here are a few of the best grasses for a high-traffic lawn:

1. Kentucky bluegrass

This grass is one of the most popular types for home lawns. It’s known for its dense growth and resistance to wear.

2. Bermuda grass

Bermuda grass is a tough, heat-tolerant grass that can withstand a lot of traffic. It’s also drought-tolerant, so it’s a good choice for dry climates.

3. Fescue grass

The growth of this type of grass is better in shaded areas. It’s resistant to wear and tear, and it doesn’t need a lot of water or fertilisation.

When you’re choosing grass for a high-traffic lawn, it’s important to consider your climate and the amount of sun and shade in your yard.

You should also consider how much water and maintenance you’re prepared to give. You may discover the ideal grass for your needs with a little study.

Read: Hardscape Installation: How to make steps and paths?

6 Basic Tips for Repairing Grass in Heavy Traffic Areas

If you have a high-traffic lawn, there are a few things you can do to keep it healthy and looking its best.

• Choose the right type of grass

Some grasses are more resistant to wear and tear than others. Kentucky bluegrass, Bermuda grass, and Fescue grass are all good choices for a high-traffic lawn. In short, they are all hardy and compact-resistant, which will help your grass stay healthy.

• Prevent compaction

Compaction occurs when the soil is compressed, which prevents air and water from reaching the grass roots. This can lead to brown patches, bare spots, and even death of the grass. To prevent compaction, aerate your lawn regularly and use light-weight lawn equipment.

• Mow high

If you mow your lawn too short, it will be damaged and more prone to infestation. When you’re mowing a high-traffic lawn, raise the height of your mower blades to at least 3 inches.

• Fertilise

Grass fertilisation will give it the nutrition it requires to stay healthy and green. Select a pesticide that is made for grass with a lot of foot traffic.

• Avoid wet grass

You should avoid mowing your grass when it is not dry. Wet grass is more likely to clump and stick to your mower’s blades, which can lead to compaction. Use a rotating mower with sharp blades if you have to mow when the grass is damp. This will aid in the reduction of clustering.

• Water

Grass requires water to thrive, so water your grass regularly, particularly in summer and dry season.

Read: Types Of Paving Slabs With Pros & Cons | DIY Installation

Alternative Solutions for High-Traffic Lawns

If you don’t want to (or can’t) switch to a different type of grass, you can do a few things to help protect your existing lawn.

• Install a walking path

One way to reduce the amount of foot traffic on your lawn is to install a walking path. In this way, people can walk in your lawn and the grass will also not be damaged.

• Use ground cover

Ground cover is a type of plant that grows low to the ground and spreads quickly. It’s a good option for high-traffic areas because it’s durable and can withstand a lot of foot traffic.

• Install a synthetic turf

If you’re concerned about your lawn’s health, you can install a synthetic turf. This is a good option for people who have a high-traffic lawn and don’t want to worry about the upkeep of a real lawn.

To sum it up

In conclusion, we can say that maintaining your lawn is a daunting task. However, it can be an easy fix with the right tools and knowledge. Follow these suggestions to keep your grass looking good all year. Have you tested any of these ideas on your home? Let us know!

Read: Discover Best Interlocking Brick Pavers Installation Ideas

FAQs

Q: How to grow grass in high traffic dog areas?

A: You can either use a hard surface like gravel or pavers, or you can use sod. If you use a hard surface, make sure it has good drainage. If you use sod, make sure to keep it well watered and fertilised.

Q: How to fix a destroyed lawn?

A: It is only damaged. If the lawn is in a small area, you can try to fix it yourself. You may need to hire a professional if the damage is more widespread. First, remove any damaged or dead grass. Then, loosen the soil and add compost or manure. Finally, reseed the area. Make sure to water it well and keep it free of weeds.

Q: Why is my grass dying?

A: There are many possible reasons why your grass might be dying. It could be due to pests, disease, poor drainage, lack of sunlight, or over-fertilisation. If you are unsure what is causing the problem, you should consult Deo landscaping in Surrey, BC.

The post 6 Basic Tips to fix Grass in Heavy Traffic Areas appeared first on Deo Landscaping.

Sod installation becomes your ultimate solution when your lawn gives an untidy look. It is the right time to refurbish your lawn when weeds and other unwanted saplings appear more on your lawn instead of velvety grass.

Have you also got bored with the traditional and time-consuming method of sowing seeds and then waiting for the grass to grow?

Read: How to lay sod over existing lawn

Best landscaping services provider in British Columbia

If yes, then a rather new method is becoming trendy now: the installation of sod. You can avail of the sod installation services along with other landscaping services in Surrey, the District of Vancouver, Burnaby, and New Westminster, Richmond by visiting Deo Landscaping.

It brings us to the question of knowing what sod is?

Read: Tips to Take Care of Your New SOD after Installation

What is sod?

Sod is a layer of laid-out grass taken out with roots and an actual amount of soil connected with it for oxidation. It consists of long strips of grass and a layer of soil present under it.

To not rot out and remain fresh after installation, it is necessary to purchase the sod on the same day of harvesting. It will increase the chances of sod becoming installed and help it grow rapidly.

How to install sod?

Installing sod on your lawn is a tedious and time-consuming task, but this method is way better than sowing seeds and waiting where the chances of success remain doubtful. Moreover, the final look and freshness are worth your time and effort.

You can install sod once you remove the old grass from your lawn. The next step involves the preparation of soil and laying sod beds over the prepared soil.

After laying the sod, neat the edges and water it frequently. Fertilization is also necessary once you are done with the procedure. If you feel that any place is left exposed, without grass, cover it with seeds to fill the shady spots.

Read: Types Of Paving Slabs With Pros & Cons | DIY Installation

What are the steps to install sod?

You can install sod by yourself by following these steps:

1. Take out the material required to install sod

It includes a soil test kit for knowing the soil, so you pick an appropriate sod for that. Organic matter prepares the soil and nourishes it well. Sod: that is our main material. Grass fertilizers that you will need after the sod. Hand towel.

There are various sorts of equipment that are designed for finishing and cutting, such as rototiller, spading fork, soil rake, carpet knife, stiff push broom, and lawn edger. The material for final finishing includes lawn roller and lawn sprinkler.

2. Measuring the area of the lawn for sod

Measuring the area of the lawn before you buy sod is very crucial. By knowing the area, you can buy an exact piece of sod that prevents you from spending extra money. However, it is advised to buy 5% extra sod so you can neatly cut it at the edges.

Buying sod by keeping in mind factors like hardness, sunlight, or shade, and the purpose of using the lawn, i.e., the harshness level, will help you to pick the best variety.

3. Remove previous grass

Laying sod on a rugged surface won’t work properly, so you need to remove old grass and a touch of old soil underneath. The goal is to make the soil level an inch below the encompassing surface so that sod can easily fit on that ground.

It can be done in the following steps:

• First, pick a sod cutter; it is a frame with a sharp blade.
• Cut the grasses from the roots.
• Lose the grass in long strips.
• Throw the old sod into the compost pile.

4. How to prepare the ground before sod?

• Preparing the soil before laying sod is the most important step because it will ensure the stability of the sod and how it will thrive in the future.
• The first step includes cultivating the organic matter in the soil. For this, you need to dig the soil to 6 inches and fill the organic matter to 2-3 inches. Organic matter is beneficial in increasing soil fertility and microbial activity that will thrive in the grass.
• Remove all the debris, weeds, and rocks from the surface and make it even.
• Level the soil a few inches below grade so that the combined width of sod and soil makes the required height.
• The finished soil should be grainy and damp, allowing the easy penetration of air and swift grip of roots.
• Water the soil well before a day so that the sod fits well.

5. Laying the sod

The next step involves laying sod along the straight edges. For this, you need to unroll the rolls of sod and start spreading it straight. Lay them all one by one from start to end. Make sure that the whole length connects with the soil underneath.

6. Finishing

Once you have laid down the sod, it is time to give the lawn and sod the final touchup. No matter how smoothly you have laid the sod beds, there will always the edges around the spaces that won’t be straight.

Don’t worry! We have a solution for that. Just fold back the excess sheet and cut out projections using a box cutter.

It seems that sod has reached its completion by looking at the outlook, but it is not because appearances are sometimes deceptive.

To make a firm connection between sod and soil, a lawn roller is required to push the sod firmly against the soil underneath.

Avoid too much walking on the sod for about a month so that the sod won’t settle down because of damp soil.

7. Watering the sod.

Water the sod regularly twice a day without missing. Watering the sod is the decisive stage because that will ensure the bondage between root and soil. Proper watering helps the roots attach to the soil and become lush and green in the future.

Continue this practice for a month and then reduce it considerably after four weeks. Make sure that the texture of the soil under the sod should be damp. Avoid extra sprinkling of water that will lead to the muddy ground.

To ensure this step, separate a corner of where you detach sod from the ground to check the water saturation level after sprinkling.

8. Fertilizing and overseeding

This step will tell how to maintain once you are done with sod installation.

The final step will help you give a wholesome look to your lawn. If you feel that there are some shady spots left, fill those places with seeds so that the grass will grow in that area as well.

Fertilize the lawn once it reaches at maturity of four weeks. Before this time, exposing sod to chemicals could be proved fatal.

Read: Hardscape Installation: How to make steps and paths?

Conclusion

Making the lawn look luscious green can add tons to your house’s beauty and the area you have planted the artificial grass. Sod installation can save your time and effort and make your dream achievable.

Proper mowing and maintenance of the grass is the key to increasing your lawn’s shelf life.

Deo landscaping is always near you to provide their services to have a lawn greener, fresher, and more durable.

FAQ’s

Is installing sod difficult?

Nothing is difficult if you approach it with a proper method. Installing sod is a bit hectic because you have to perform all the steps within the day. After every step, giving yourself some rest will prevent fatigue and boost your activity.

Can you install sod on your own?

Yes, by following these steps, you can install sod yourself. It is time taking process that must be carried out with patience. If you rush a process, the results will appear on the growth and keeping of your lawn.

In another case, if you doubt your skills, you can consult a professional and buy their services for sod installation.

Sod installation cost

Sod costs between $0.30  to $0.83 per square foot on average if you are installing sod on your own because, in this case, you are just investing in sod.

If you have consulted a professional, it swelled from $0.87 to $1.76. So, applying it to the whole lawn will cost $400 to cover a 1,000-square-foot backyard.

You also need to spend on fertilizers to keep up with the maintenance. The cost of fertilizers adds another $5 to $10 to your budget.

Sod installation time

Sod installation consumes a different time range because it depends on various factors. It will vary from lawn to lawn, taking comparatively more time for big and edgy lawns.

On average, to cover an area of 600 square feet, a person will take approximately two hours. Laying sod does not take much time; it the edges where the most cutting is required, increasing the time from case to case.

Related Posts:

Discover Best Interlocking Brick Pavers Installation Ideas

6 Basic Tips to fix Grass in Heavy Traffic Areas

Why The Landscaper Is The Best For Business?

The post 8 Simple Steps To Install Sod On Your Lawn appeared first on Deo Landscaping.

Why The Landscaper Is The Best For Business: The Landscaper is a premium WordPress theme designed specifically for lawn, landscaping, and gardening businesses. We’ve done extensive research so we know what your company needs. The theme is very easy to set up and use. Demo content is imported with a single click so you can immediately start editing your website.

Artificial grass installations

The post Why The Landscaper Is The Best For Business? appeared first on Deo Landscaping.

Deo Landscaping; Best Landscaper Of The Country award || Yesterday we were awarded the ‘Best Landscaper Of The Country’ award. These awards of excellence were awarded for projects we designed and installed. This award reflects our commitment to creative design, ongoing excellence in engineering, and our ability to produce beautiful and functional outdoor living spaces of which people are proud.

The post We Won The ‘Best Landscaper Company Award; Deo Landscaping appeared first on Deo Landscaping.